Six core steel reinforced concrete columns were tested under axially loading, and a nonlinear numerical analysis simulating the whole test process of ten specimens is carried out by the finite element method software-ADINA, to investigate the effect of core steel, transverse reinforcement and steel ratio to the axial strength and axial deformation capacity.
通过6个核心型钢混凝土CSRC柱试件的轴压性能试验，并利用高级结构非线性及流固耦合计算系统进行10个试件的有限元数值模拟试验，研究不同配箍特征和配钢率对混凝土柱轴心抗压承载力及轴向变形性能的影响。
The whole result show that the output of ADINA software is consistent to that of theoretical mathematical model.
计算结果表明，ADINA与本文建立的水击数学模型的计算结果吻合较好。
After analyzing factors impacting the water hammer, the paper set up the water hammer mathematic model, apply character line method and ADINA software to solve model.
本文在分析影响水击因素的基础上，建立了水击效应的数学模型，并用特征线法以及ADINA有限元方法对水击数学模型进行了求解。
The GOB underlying highway is simulated by non-linear finite element software ADINA which considered three belts of superjacent rock body in GOB region:caving belt, crevasse belt and bending distortion belt.
中文摘要：运用非线性有限元软件ADINA对高速公路下伏采空区进行模拟，模拟考虑了采空区覆岩体三带：冒落带、裂隙带和弯曲变形带。
At the same time, carrying through numerical simulation on temperature field under three kinds of cases by ADINA-T in ADINA software, it makes a sensitive analysis to key points in tympanites roadbed and makes a conclusion that the side close to river valley is easier to produce highway tympanites than the side close to another.
通过运用有限元计算程序ADINAT对翻浆路基处于三种工况下温度场的数值模拟，对关键点进行敏感性分析，位于路堤同一深度，工况一中剖面Ⅰ—Ⅰ节点的温度相对剖面Ⅱ—Ⅱ节点的温度均低0.045K；工况二中剖面Ⅰ—Ⅰ节点的温度相对剖面Ⅱ—Ⅱ节点的温度均高0.023K；工况三中剖面Ⅰ—Ⅰ节点的温度相对剖面Ⅱ—Ⅱ节点的温度均高0.022K。
Geogrid, a new kind of geosynthetics, is chosen as the main material for embankment reinforce due to its high strength and low prolongation ratio. Embankment engineering of soft clay foundation is analyzed by ADINA program to establishment two dimension model.
土工格栅是最近二三十年发展起来的一种新型建筑材料，该材料因拉伸使强度和刚度都有较大的增长，较大的孔眼可使较大的土、石粒嵌入，具有抗拉强度高、与土颗粒的界面摩擦角大、嵌锁能力强等特点。
Buried pipeline`s damage under fluid-structure interaction is analyzed through ADINA-FSI with conveying medium and velocity in consideration.
在考虑管内介质及流速的情况下，应用ADINA中流体-结构耦合分析求解器ADINA-FSI分析了固液耦合作用下地下管道的破坏情况。
In Thousand Oaks, Calif., Adina Nack keeps the thermostat at 28– and lets her toddler dance around the house in a bathing suit, spritzing herself with cool water from a spray bottle.
夹在电价上涨和全球变暖恶果之间的美国消费者在是否应关掉冷气的问题上很是挣扎。
［Objective］ To screen the anticancer fraction from extract of root of Adina rubella Hance.
［目的］分离筛选水杨梅根中抗直肠癌细胞活性部位。
Methods］To separate the water extract from root of Adina rubella Hance by different solvens, then determine their anticancer activities of the different extracts in vitro with MTT method.
方法］采用系统溶剂法对水杨梅根水提取物进行分离，应用MTT比色法对分离得到的部位进行体外抗肿瘤活性的测定。
Adina Howard did not let her label issues stop her from promoting the new album.
Adina Howard不准备让厂商的发行原因阻止她宣传新专辑。
The physical model established takes into account the lubricating oil film, thrust bearing, runner and thrust head. The thermo elastic deformation of the thrust bearing and runner was analyzed based on ADINA program.
物理模型包括润滑油膜、推力轴承和镜板推力头，采用ADINA程序计算水口巴氏合金瓦和三峡弹性金属塑料瓦推力轴承和镜板推力头的热弹性变形，并对轴承性能的计算结果和测量结果进行了对比分析。
Under concentrated load, using finite element method, deflection of beams at center of span, and load-stress, load-strain of steel bar and CFRP sheet are analyzed for RC simply supported beams strengthened with different types of CFRP sheet. At one time, we also calculate deflection of beams at center of span under line load.
用有限元软件ADINA分析了集中荷载作用下矩形梁、T形梁在不同粘结方式时梁的跨中挠度、钢筋与碳纤维布的荷载—应力、荷载—应变关系，并将计算结果与试验结果进行了对比，分析产生误差的原因；同时对均布荷载作用下T形梁的跨中挠度进行了计算。
The equivalent disposal of seabed boundary also has not been taken into consideration. Based on the Biot's theory of consolidation, the model of the seabed-pipeline interaction is established using viscous-elastic artificial boundary.
基于Biot动力固结理论建立了海床-管线相互作用的计算模型，利用粘弹性人工边界，以大型有限元软件ADINA为平台对El-Centro地震波作用下的海底管线的动力响应进行分析，重点讨论了成层海床土对海床中孔隙水压力和海底管线内应力的影响。
The friction, friction coefficient etc of prescind from external asperity model and the single asperity model in plasticity forming were respectively researched by using finite element analysis software ADINA and Coulomb friction model and nonlocal friction model.
应用大型有限元软件ADINA，采用库仑摩擦模型和非局部摩擦模型，对不考虑表面微凸的模型和单个微凸体模型在塑性成形中的摩擦力、摩擦系数等进行研究。
［Objective］ To research main compounds in different fractions of water extract from the root of Adina rubelle Hance.
［目的］研究水杨梅根提取物不同提取部位的主要成分。
The paper mainly describes the basic function, data treatment, program design idea, for preprocessing system AED, has developed AED program of ADINA and presented some problems in implementing AED program.
本文阐述了前处理系统AED的基本功能、数据处理及程序设计思想，开发了ADINA前处理系统AED程序，并介绍了AED程序实现中的若干问题。
Design and Implementation of AED Program of ADINA Preprocessing System
ADINA程序前处理系统AED程序设计及实现
With the discharge rubber compound temperature above 100℃, the compound is in the state of viscous fluid. So it was according to the extrusion theory for viscous fluid that the mathematical equation of the relation between extrusion production capacity and other parameters for this machine is concluded in this paper.4. According to the production capacity of internal mixer and extruder, together with it's influence factors, the mathematical equation for the continuous process of mixing and molding was set up, which can act as the theoretical basis of the experimental research.5. The finite analysis of the fluid field in the process of mixing and molding was performed with the help of ADINA.
建立混炼成型一体机混炼理论的数学方程，可作为验证计算机流场模拟结果的依据。3、详细探讨了混炼成型一体机的挤出成型理论，由于从混炼室排出的胶料温度超过100℃，因此在整个挤出过程中胶料为粘性流体，根据现有的粘性流体挤出理论得出本实验机台的挤出生产能力与其他参数间的数学方程。4、根据密炼机和挤出机的生产能力和有关影响因素，建立起挤出机与密炼机协互相调、连续生产的混炼成型连续化数学方程，并指出了影响混炼成型连续化的因素，为相关的实验研究提供了理论支持。5、利用ADINA软件分别对混炼部分和挤出成型部分进行了流场的有限元分析。
After Adina explains all this, she goes back to talking on her cell phone.
艾迪娜说完这个后，又回到了她的手机上。