The ways on most modern lathes are surface hardened to offer greater resistance to wear and abrasion.
大多数现代机床的导轨都要进行表面淬火处理，以减少磨损和擦伤，更大的耐磨性。
The ways on most modem lathes are surface hardened to offer greater resistance to wear and abrasion.
大多数现代车床的导轨要进行表面淬火处理，以减小磨损和擦伤，具有更大的耐磨性。
Tool wear resulted in increased cutting tool forces and machined surface temperature.
刀具磨损造成更多的部队和刀具加工表面温度。
Silica nanoparticles modified with organic compound containing double bonds was synthesized by surface modifying in situ and the structure was characterized by Transmission electron microscopy, X-ray powder diffraction, Fourier transform infrared spectrum and chemistry analysis. Dispersivity of the nanoparticle was studied by measuring light transmittance, and friction reducing and anti-wear behavior of the silica used as additive in lubricant were analyzed on wear tester.
以正硅酸四乙酯为前驱体，以含不饱和双键碳链为修饰剂采用原位表面修饰法合成出1种可反应性纳米二氧化硅并对其结构进行表征；测定其透光率并得出在介质中的分散性；采用往复摩擦磨损试验机和四球摩擦磨损试验机考察纳米二氧化硅作为汽油机油添加剂的摩擦磨损行为，并用扫描电子显微镜及能量色散谱仪对其磨痕进行观察和分析。
Mo distribution on the complex films surface were researched. There was better dispersion of 30% MoS2 in PI film. At this mixture ratio, the complex film maintained mechanical character and reduced the friction coefficient. And better wear properties could be obtained.
结果显示加入量为30%的MoS2在复合膜表面富集，且分布较为均匀，在此配比下的复合膜能够存休证机械性能的基础上有效降低摩擦系数，随载荷的增加，磨擦系数稳定。
Self-repair technology of wear of materials is an innovation technology in the field of surface engineering.
金属磨损自修复技术是一项具有创新性的表面工程领域新技术。
Vinyl Ether── A New Type of Reactive Diluents for Photocuring; 2. Study on Synthesis, Photocuring and Thermal Degradable Property of Cycloaliphatic Diepoxides; 3. Moreover, the performance(wear resistance, surface hardness, adhesion and transparency) of the photocuring composite membrane was studied in detail.
利用合成的有机/二氧化钛纳米杂化材料与含硫环氧树脂复合进行紫外光固化反应，研究了这种固化膜的各种性能如耐磨性、表面硬度、附着力和透过率，并利用红外光谱和扫描电镜对固化机理和复合材料的相容性进行研究。
Because the printing plate surface-gradually wear, will reduce the surface area, so that a capacity reduction of spoiledour superhydrophilic or inorganic salt layer to an empty part of the dirty oil up gradually, seriously reduces the life expectancy of a printing plate.
因为印版暗不天砂目忽然磨损，暗不天积也随着贬矮，使储火度裁减，爱护了干火无机盐层或贬矮其安定性，使空缺局部忽然干油起不净，严轻贬矮了印版的搁置寿命。
Ceramic bearings can produce oxidation-ho, silicon carbide, silicon nitride and so on, diameter from 3mm-50mm, precision Machinable P0, P6, P5 level; its performance characteristics are: high temperature, oil-free self-lubricating, acid, alkali and salt corrosion, wear resistance, low noise, insulating diamagnetic, since high-speed operation; metal nano-ceramic bearing its production process for a new generation of high content of nano-particles in the heat and pressure infiltration of metal surface is activated to fill the cracks and pits the metal so that 3-5 micron metal surface is more smooth solid surface, greatly reduce the friction, improve Chennai base metals, and greatly increased the life span of bearings, and its characteristics are: long life (as an ordinary stainless steel bearings 2 -- 10-fold), low noise (as an ordinary stainless steel bearings, 70%), wear-resisting, acid, alkali, salt corrosion, high temperature, load large; ceramic bearing and metal nano-ceramic bearing design and development to meet the needs of the market for high-speed, low - noise, high load, the demand for corrosion-resistant; Machinery Production Department to produce aircraft rod end joint bearing, linear guide bearings, the fuel tank of earrings, plastic bearing, non-standard side bearing components, glass door hardware, such as high-precision control products; and provide CNC machining.
陶瓷轴承可生产氧化镐、碳化硅、氮化硅等，内径从3mm-50mm，精度可加工P0、P6、P5级；其性能特点为：耐高温、无油自润滑、耐酸、碱、盐腐蚀、耐磨、低噪音、绝缘抗磁、起高速运转；金属纳米陶瓷轴承其生产工艺为新一代的高含量纳米级微粒在热和压力的作用下被激活渗入金属表面，填补金属缝隙和凹坑，使金属表面3-5微米表面更光滑坚固，大大降低其摩擦力，提高金属的奈酸碱性，并大大提高了轴承的寿命，其特性为：长寿命（为普通不锈钢轴承的2-10倍）、低噪音（为普通不锈钢轴承的70%）、耐磨、耐酸、碱、盐腐蚀、耐高温、负载大；陶瓷轴承与金属纳米陶瓷轴承的设计开发以满足市场对高转速、低噪音、高负载、耐腐蚀的需求；机械生产部以生产机杆端关节轴承、直线导轨轴承、油缸耳环、塑料轴承、非标端轴承零部件、玻璃门控五金等高精度产品；并对外提供数控加工。
For example, the quality of surface finish, amount of bearing clearance, metal carbon content, and type of metal processingmay influence the wear behavior of the bearing.
例如，表面抛光的质量，轴承间隙数值，金属与碳的比例，并金属制作的方法可影响负荷下的耐磨性能。
It produces a poor surface finish; tool wear is high.
它生成很差的表面光洁性且刀具磨损非常大。
The effects of material composition, working surface treatment and microstructure on wear resistance of powder hot-forging flow oil-seal ring were studied.
研究了粉末热锻浮动油封密封环的材质、表面处理、显微组织对其耐磨性的影响。
Valve welding electrode for use: Implementation of the GB984-2001 standard Surfacing is the edge FILTER SERIES of workpiece surface or cladding layer of wear and corrosion, heat and other properties of the metal layer of the welding process.
阀门堆焊焊条使用说明：执行GB984-2001标准堆焊是在工件的表面或边缘进行熔敷一层耐磨、耐蚀、耐热等性能金属层的焊接工艺。
Spray materials are melted or partly melted by flame, electric arc or plasma plume and propelled onto the substrate by compressed gas. The sprayed coating can improve the surface properties of material, such as wear resistance, corrosion resistance and thermal insulation capability.
热喷涂是通过火焰、电弧或等离子体等热源将某种线状或粉末状的材料加热至熔化或半熔化状态，并通过气流吹动使其雾化高速喷射到基体表面，以形成喷涂层的表面加工技术。
However, they usually require heat treatment to produce a surface hard enough to give satisfactory resistance to wear.
然而，它们通常需要经过热处理，以生成表面的硬化层来达到足够的耐磨性。
Valve in operation, the friction of the surface Because of the role and metals and machinery for chemical Plug Valves or electrochemical environment, the interaction of the outcome wear and damage.
阀门在操作过程中，眼镜阀盲板阀摩擦的表面由于同时的机械作用和金属与环境进行化学的或电化学的互相作用的结果产生磨损和破坏。
The inuence of tool wear on surface nish is not included because fresh tools are employed during the milling experiments.
那个 影响刀具磨损的表面光洁度不包括因为新的工具是受雇期间铣实验。
Wear Yanyan top there is a stone like a hook hanging in the air, wearing a boulder cave mouth, such as frogs surface, surrounded by rocks in the vicinity of that bear wearing hiking, Camel Hill, a monkey mountain vivid display of the corner.
穿岩岩顶有一小石如钩悬在空中，穿岩洞口有一圆石如青蛙浮出水面，簇拥在这穿岩附近的那熊爬山、骆驼山、猴子山活灵活现地展现在眼前。
So eddy current sensor could be used for measuring displacement and surface position after wear of rotating disc.
对热磨机进行主轴运行状态监测时，可以将传感器安装在轴承套座上径向的水平位置，并且在轴向应尽量靠近研磨时轴承所在的位置。
The leather strap, but also to safeguard them in order to avoid daily use of regular wear and tear strap pull, even if the surface of the new new watches also look very old.
皮革表带，而且还保障他们，以避免经常穿着日常使用和撕裂带拉，即使新新手表的表面也期待很老的。