In this study, the polythiophene is prepared by chemical oxidation polymerization. Bonding the thiophene with flexible siloxane, the conjugate polymer becomes soluble in many solvents, and it becomes thermochromic at room temperature.
而本研究第一部份是利用化学聚合，合成出室温温变色之高分子，在主链导入一柔软的侧链矽氧烷，在室温下产生变色。
In this paper, it is mainly from dispersion and interface bonding point of view suggested that the multi-walled carbon nanotubes were filled into polymer matrix.
本文主要从分散和界面结合的角度出发研究了多壁纳米碳管与聚合物的复合，通过对复合材料微结构和力学性能的表征，分析了碳管在聚合物中的作用机理。
Columns under eccentric loading in which ultimate loading capacity and ductility of the column need to be greatly improved. in order to solve this problem in practice, a strengthening method is presented by using both bonding carbon fiber reinforced polymer sheets and steel angles.
本文为解决工程中这一的实际问题，提出了粘贴碳纤维布和角钢的复合加固方法，并对复合加固柱极限状态下的力学性能进行了研究。
At the same time, in order to overcome by fiber composites poor adhesion to bring trouble, the processing of parallel Dyneema fiber, these fibers were stranded horizontal merger adopts special polymer adhesive bonding, it can be made and equipment from high-speed bullet fragments and similar bomb, the threat of injury.
同时，为克服因纤维粘合性差给复合材料加工带来的麻烦，由平行铺设的Dyneema纤维构成，这些纤维被横向绞合并采用特种聚合物粘合剂加以粘合，它可以使人和设备免遭高速子弹、炸弹碎片和类似的威胁的损伤。
However, the toughness and bonding strength of modified adhesive are effectively improved by modifying with EC polymer. when the ratio of EC which has 15% CTBN and BDME is 1/2, the modified epoxy adhesive has a good properties. Its shear strength and rupture elongate quotiety is 50.07MPa and 3.95%, peer strength is 1.16kgf/cm, passed the test of 320℃boiling stannum. This adhesive has some industry applied value, especially the thermal endurance has exceeded the request of presently adhesive used in flexible printed circuit board.
而通过EC改性胶粘剂可进一步提高其韧性和粘结强度，当BDME与含15％CTBN的EC比例为1：2时，其共混胶粘剂的剪切强度为50.07MPa，断裂伸长率可达3.95％，剥离强度为1.16kgf／cm，并能够通过320℃的锡焊浴测试，该胶粘剂具有工业应用价值，特别是耐热性已远超过现行FPC板所用的胶粘剂。
The carbon fiber coiled rod proceed compare, analyses different kinds of carbon fiber coiled rod'mer with carbon fiber world face bonding instance, and different kinds of carbon fiber coiled rod'mechanical property, thereby erect differ mer'sucker rod not so much mechanical property of compartment'parallelism relation, thereby gist these one relation design new style dispensation'carbon fiber reinforced polymer composite coiled rod for as well of the these theses versus available different kinds of differ mer.
本论文对已有的各种不同基体的碳纤维连续抽油杆进行比较，分析各种碳纤维连续抽油杆的基体与碳纤维的界面结合情况，以及各种碳纤维连续抽油杆的力学性能，从而建立不同基体的抽油杆与其力学性能之间的对应关系，从而依据这一关系设计新型配方的碳纤维增强复合材料连续抽油杆。
A steel bar is washed and dried, and then put into a glass pipe which is sealed to obtain stirring magneton; a mixed solvent of Gamma-methacrylate oxide propyl trimethoxy silane and methanol is prepared and added with an organic base to obtain a pre-bonding solvent; the stirring magneton is immerged into the pre-bounding solvent, and the outer surface of the glass pipe of the stirring magneton is bonded with a layer of silane substance with alkenyl; a reactive monomer mixture and a pore-forming agent mixed solvent are evenly mixed and then added into a container, the stirring magneton after the pre-bounding is put into the container which is sealed and then put into a water bath; after reaction, the container is removed, the stirring magneton coated with a polymer is taken out and put into a extractor and extracted by using a solvent; or the stir bar is immersed into the solvent till no impurity can be checked in the solvent, thereby obtaining the product.
将铁条清洗干燥，放入玻璃管内，密封得搅拌磁子；配制γ-甲基丙烯酸氧丙基三甲氧基硅烷与甲醇的混合溶液，加入有机碱得预键合溶液，将搅拌磁子浸入预键合溶液，在搅拌磁子的玻璃管外壁键合一层带烯基的硅烷化物质；将反应单体混合剂和致孔剂混合溶液混匀后倒入容器中，将预键合后的搅拌磁子放入容器，密封后置于水浴中，反应后除去容器，取出涂有聚合物的搅拌磁子，置于提取器中，以溶剂提取，或将搅拌棒置于溶剂中浸泡至溶剂中无杂质检出，得产物。
I To measure the adhesion of polymer coating to steel substrate by the direct pull-off technique, the most efficient way is heating the stud to 210癈+ 10 癈, use it fusion ethylene-methacrylic acid in its surface then bonding it to the coating surface.
本研究主要结论如下：(1)用拉开法测量火焰喷塑涂层附着力时，有效的粘接方法是采用加热粘结，并在粘结柱头表面预涂EMAA涂层，该方法能保证良好的测量效果和试验的可重复性。
Mixing the polymer into mortar can improve the interface bonding performance between mortar and foamed polystyrene block.
在砂浆中掺加高分子聚合物，以提高砂浆与发泡聚苯板的界面结合性能。
The process parameters are relation to the materials`properties. In this paper, four SLS polymer powders were selected as the experiment materials, and the four materials`properties, for example distribution of particle size, stacking density, melt index, bonding temperature, were measured.
合理的工艺参数组合是获得良好成型质量的关键，成型工艺参数的设置和材料的性能有关，本文选择四种SLS高分子粉料，对各自的粒度分布、堆积密度、熔融指数、板结温度等进行了测试。
The invention relates to an agglomerate containing at least one of the following water-soluble or water-dispersible materials as a bonding base polymer: carboxylized and/or alkoxylized starch, cellulose ether and fully synthetic vinyl polymers and/or polyacrylates.
按本发明的凝聚体至少含有一种下列水溶性或水可分散的材料作为粘合的基础聚合物：羧基化的和／或烷氧基化的淀粉，纤维素醚和全合成的乙烯基聚合物和／或聚丙烯酸酯。
Prior to use of it, apply a layer of special purposeinterface agent to enhance affiniTY bonding force of polymer and extrusion piastic panel
具有抗冲击韧性和足够的应变性能使用前并对板面涂刷专用界面处理剂，藉以增强聚合物砂浆与挤塑板的亲合粘结力。
Beipeng polymer bonding mortar is developed by using imported raw materials catering for the practical application in China. This product is made of imported gelatine powder, arenaceous quartz, high-quality cement and so on, and by means of pre-mixing and dry mixing.
北鹏聚合物粘结砂浆是采用进口原料开发出的适合中国实际应用的新产品，本产品是由进口胶粉、石英砂、优质水泥等原料通过预混、干拌而成的一种灰色粉末状材料。
ZhongYaHanFeng polymer bonding mortar is developed by using imported raw materials catering for the practical application in China. This product is made of imported gelatine powder, arenaceous quartz, high quality cement etc. and by means of pre-mixing and dry mixing.
中雅汉风聚合物粘接砂浆是采用进口原料开发出的适合中国实际应用的新产品，本产品是由进口胶粉、石英砂、优质水泥等原料通过预混、干拌而成的一种灰色粉末状材料。
The thesis deals with the effect of hydrogen-bonding complexation on the interfacial behavior of the polymer chains by using laser light scattering, neutron reflectivity and Langmuir balance, including the aggregation of thermosensitive multi-blcok copolymers, the structural evolution of the polymeric aggregations and the interfacial behavior of the polymer chains at the air-water interface.
本论文中，我们利用激光光散射、中子反射仪和Langmuir天平等技术研究了氢键对高分子链界面行为的影响，包括氢键对温敏性多嵌段聚合物链聚集机理、高分子聚集体结构演化和高分子链在气液界面上的行为的影响。
In order to achieve the aim of dentin bonding, the employment of polymer technology have led to the recent development of resin-based obturation materials.
为要达到与牙本质键结的目的，必须藉助高分子工程的专业技术，发展以树酯为基底的替代封填材。
It is the first time to obtain a novel cyanide-bridging multinuclear CuI coordination polymer by the reaction of one of these ligands with CuI in a CH3CN/EtOH system.4. By using the bispyridine carboxamide ligands, we have successfully synthesized seven complexes with diverse supramolecular network structures by the self-assembly with different transition metals through the coordination and the intermolecular hydrogen-bonding interactions.
首次利用这类配体在乙腈/乙醇体系中与CuI作用得到了一个具有新颖结构的氰基桥联多核CuI配位聚合物。4、以双吡啶酰胺类化合物为配体，通过配位键和氢键等弱相互作用力与一价、二价金属盐自组装，合成得到7个具有超分子网络结构的配合物。
It was found that the quantity of non freezable bound water adsorbed in polymer depends on the hydrophilic site nature and its hydrogen bonding capacity.
在亲水聚合物中，结晶结合水在低于Tg温度下成核，在高于Tg温度时增长。
The activated hydroxyl of the rare earth complex reacted with the -NCO of the of isophorone diisocyanate, and a new bonding-type rare earth polymer materials was prepared. We studied the optical property, thermodynamic properties of the materials were, and the results obtained show that the materials have high light transmittance and thermal stability as well as good fluorescence properties.
同时利用配合物的活性基团羟基与异佛尔酮－二异氰酸酯中的异氰酸根活性基团进行反应，制备出一种新型的键合型稀土高分子材料，并考察了该材料的光学性能、热力学性能等。
Skim Ad-Bond Latex is a styrene acrylic polymer latex additive for use as a bonding agent, primer, or damp resistant sealer.
实坚乳胶增黏剂是一种苯乙烯丙烯酸聚合物乳胶添加剂，可作为黏结剂、底层剂及抗潮湿封填剂。