Make temporarily the experiment of load, the experimental step that takes → of the drop that brush →→ to exhibit → to build → to catch first is written on blackboard, let a student see a book understand the meaning of each pace, encircle crucial term, the meaning of each pace reachs pedagogic retell watchful problem, the edge calls a student to imitate an operation by the side of the operation.
制作临时装片的实验，先将擦→滴→取→展→盖→染的实验步骤写在黑板上，让学生看书了解每一步的涵义，圈上关键的词语，教师再讲每一步的涵义及注重的新问题，边操作边叫学生模拟操作。
In order to make the Jinlu trademark ZHF5050TSL sweep road car adapt to various complicated working condition of clean road, The authors carried on an analytical research towards sucker device of the sweep road car, and bring up the improvement design project, through experiment again and again, the result is good.
为了使金路牌ZHF5050TSL扫路车更能适应各种复杂路面的清扫工况，对扫路车吸盘装置进行了分析研究，并提出了改进设计方案，经反复试验，效果良好。
Utilized the method of big area contrast to make an experiment on effect of applying Shenfeng biological fertilizer.
用大区对比法对申丰牌高效生物肥施用效果进行试验。
Atractylodes japonica koidz ex kitam was largely distributed in YanBian. In order to make this regional medicinal herb be recorded as an orthodox one in Chinese pharmacopoeia, the studies on the quality standards of it were carried out in this experiment.
菊科植物关苍术（Atractylodes japonica koidz ex kitamura），在延边地区有大量分布[1]，本实验为将关苍术这一道地的民族药材作为正统药材载入中国药典，做了关苍术中药新药材的开发研究。
During the experiment, we choose Toyota Corona 1600cc as a test car and measure its maximal acceleration value by means of palm vibration noise analyzer, on conditions of the same tire pressure, speed, load, and road section and measure fuel consumption in a fixed speed and mileage. In addition, by using tire pressure gauge and infrared thermometer, measure after-driving tire pressure and tire temperature to make a comparative analysis. Finally, we use 185/60 R-14 Goodyear tire to measure tire sinkage in an empty car and a loaded car and obtain tire compression ratio to explain the difference of riding comfort and economical consideration of fuel consumption between nitrogen-filled tires and compressed air tires.
在实验时，采用丰田Corona 1600cc轿车，在相同的胎压、车速、负载、路段等条件下，透过掌上型振动噪音分析仪，撷取车辆行驶之最大峰值加速度；并在稳定车速及固定里程下量测汽油之消耗量，再以胎压表和红外线温度计，量取行驶后之胎压和胎温值来作比较分析，最后，再使用185/60 R-14 Goodyear 轮胎，在车上量测空车及负载下轮胎的下沉量，并求得轮胎的压缩率变化值，来说明氮气轮胎与一般压缩空气轮胎，在乘坐舒适性及燃油经济性上的差异原因。
When the oil sunflower seeds were treated with electric field, we make an experiment upon the influence of electric field on the PE of the seeds and the seedling roots.
我们用电场处理油葵种子，测定电场对油葵种子和幼苗根系超弱发光值的影响。
This thesis uses theoretical approach, combining experiment method, to make an in-depth study on the pressure drop of filter-paper, clean and clogging pleated air cleaner products.
本文以理论研究为出发点，结合实验的方法，对滤纸、清洁褶状空气滤清器以及含尘褶状空气滤清器的阻力进行深入研究。
This text carries on the calculate way to an algorithm of successive Over-relaxation within the linear equations method analysis, for successive Over-relaxation put forward a few different methods in the selection of relaxation factor ω, and analysis and program designs it's step by step experiment calculate way, so as to make successive Over-relaxation iteration algorithm carry out efficiently on compute.
科学计算和工程设计中，经常会遇到求解线性代数方程组的问题，而且在计算方法的其它分支的研究也往往归结为此类问题，如何利用计算机求解线性方程组，是我们共同关心的课题。在计算机上求解线性代数方程组的数值解法有两类[1]：一类是直接解法，就是指经过有限步运算求得方程组的解
Please make an experiment - take two similar pices of material and furl on the yard.
请做一个实验：取两块相同材料的布片和卷在帆桁上。
Please make an experiment-take two similar pices of material and furl on the yard.
请做一个实验：取两块相同材料的布片和卷在帆桁上。
Through designing of composition and structure of the bioactive graded coating, innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side, the bottom of the coating; the stress value near the interface and surface and its character, pressure stress or tensile stress, were decided by the character of its composition itself. Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).
将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。
Finally, the study make an experiment on the two algorithms with simulated data.
最后，本文通过使用模拟数据分别对两种算法进行试验研究。
In order to resolve this problem for a real VDS, this paper presents a study on the influence of towed cable kiting, an analysis of the reasons that make it happen and introduces the methods to resolve this problem as well as the experiment results.
本文针对为解决某变深声纳拖缆拖体系统拖航时出现的严重漂移，介绍了漂移的危害，分析了漂移产生的原因，解决漂移的方法和试验研究结果。
Objective To observe the influence of verapamil injection on efficiency of peritoneal dialysis and make an inquiry into the mechanism by animal experiment.
目的动物实验观察异搏定注射液对腹膜透析效能的影响，并初步探讨其作用机理。
By comparing the results of the two methods, SVM method is proved effective. Thirdly, we conduct an experiment on a simply supported beam, and make SVM method act on the sample aggregate to identify the structural damage.
第三，进行实验室简支钢梁模型实验，将支持向量机损伤识别方法作用于样本集，实现对模型结构的损伤识别，通过实验结果分析验证了支持向量机方法对模型结构损伤识别的有效性。
An Experiment on Adding the Modified Starch to the CTMP and KP Pulp to Make the Box Paperboard
改性淀粉在CTMP和KP浆抄造箱纸板中的添加试验
On an Attempt to Make an Ecological Design Architectural Design of the Environmental Experiment Centre Building of Shanghai Institute of Architectural Design Research
关于生态设计的一次尝试&记上海市建筑科学研究院环境实验楼建筑设计