Material: Tank-- SUS304/0Cr18Ni9; Frame--SS400 coat of paint; Seal gasket--EPDM.
材料：罐体-- SUS304/0Cr18Ni9；框架--碳钢，表面喷漆；人孔密封圈--三元乙丙橡胶
One problem with EPDM is that they have been known to shrink in some circumstances.
三元乙丙问题之一是，他们已经在某些情况下已知萎缩。
The effect of nano-CaCO3 amount on cure characteristics and mechanical properties of EPDM were investigated.
考察了纳米CaCO3用量对EPDM硫化性能和力学性能的影响。
The reaction control of EPDM/PP TPV and the relationship of properties with reaction control were studied.
对EPDM/PPTPV的反应控制及反应控制与性能的关系进行了研究。
EPDM Geomembrane is made of mineral charges and large amounts of carbon black.
土工膜是由矿物电荷和大量的炭黑组成的。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
The dispersion of the resin in EPDM could be improved by using heating process.
为了明确造成上述现象的原因，对溴化酚醛树脂在胶料硫化过程的形态变化进行
The course of development of EPDM composite coloured shingle is described with focus on its main materials and self-stick layer.
介绍了EPDM复合彩瓦的研制过程，并对其中的主体材料和自粘层作了详细的论述。
DSC analysis of EPDM/ZDMA/DCP compound shows that exothermic reaction occurs during curing and it indicates that ZDMA is a reactive filler.
对EPDM／ZDMA／DCP混炼胶的DSC曲线分析表明，在过氧化物交联橡胶的同时，作为填充剂的ZDMA还发生了放热化学反应，ZDMA是一类反应型填料。
TGA results show that the thermal stability of EPDM nanocomposites is slightly higher than that of EPDM composites.
但是，随着EPDM/有机化粘土纳米复合材料比EPDM/粘土传统复合材料的邵氏硬度提高程度要大。
In wire and cable industry, when used to treat EPDM system stuffed by pottery clay and crosslinked by peroxide, it can improve consumption factor and specific inductance captance.
电线电缆行业，用该偶联剂处理陶土填充过氧化物交联的EPDM体系，改善了消耗因子及比电感容抗。
A few researches have been devoted to the formation and distribution of space charge, therefore, in this paper we mainly focus on silicone rubber, the distributions of space charge of single layer silicone rubber and two layer mediums which composed by silicone rubber and EPDM or XLPE are measured under different electrical stress. The formation and changing mechanism of space charge of these mediums are investigated; we consider the instability of space charge under 70kV/mm can forecast the pre-breakdown of insulation, by comparing space charge distributions with stressing time and after short circuit for a while. The accumulation of space charge at interface can distort electrical field in the dielectric, which can cause partial discharge at the interfaces of polymers and affect the reliability of cables.
但国内外对硅橡胶中空间电荷的分布与形成机理研究甚少，故本文的主要任务是以硅橡胶为主要研究对象，测量了硅橡胶单一均匀介质以及它与三元乙丙橡胶或交联聚乙烯构成的双层介质中空间电荷在不同加压场强下的分布情况，通过比较空间电荷分布随着加压时间的增长而发生的变化以及加压一段时间并短路后空间电荷的分布情况，研究了空间电荷在上述各种介质结构中形成及变化的机理，认为在70kV/mm下硅橡胶中空间电荷积聚数量的不稳定性可作为绝缘击穿前的征兆。
Produced from PVC White or PVC Clear with White compression end connectors and EPDM seats.
采用PVC白或PVC透明材料制造，配置白色压缩连接端口和EPDM阀座。
The relations between MFI and rheological properties as well as Mooney viscosity were established.
用熔体流动指数仪研究了三元乙丙橡胶熔体的流变性能，建立了实验条件下EPDM的熔体流动指数与流变参数、门尼黏度之间的关系。
Company can produce according to customer requirements to meet UL standards for flame-retardant foam, foam production and deep processing of products: PU Forming Foam (for car seat, motorcycle seat, bedding, toys, etc.), compressed sponge, conductive sponge, activated carbon filter sponge, makeup sponge, ULl-94V, HF-1, HBF certified fire sponge, high-frequency asbestos, sealing foam, slow resilience sponge memory sponge, sponge inert, water and sponge, sealing sponge, wood cotton pulp, rigid sponge, OA machines, office supplies Professional sponges, cotton headphone, microphone sponge kits, shock absorption material (Rubber Foam, Back to edge glue, transparent pad, PORON pad, CR pad, EPDM) and other special industry sponge deep processing of products!
公司可根据客户要求生产出达到UL标准的阻燃型海绵，发泡生产及制品深加工：PU成形泡绵（用于汽车座垫、摩托车座垫、床上用品、玩具等）、压缩海绵、导电海绵、活性炭过滤海绵、化妆绵、ULl-94V，HF-1，HBF认证防火海绵、高周波绵、封口泡绵、慢回弹海绵〔记忆性海绵、惰性海绵〕、止水性海绵、密封海绵、木浆绵、硬质海绵、OA机器、办公用品专业海绵、耳机绵、麦克风绵套、减震材料（橡胶泡绵、回力胶、透明胶垫、PORON垫、CR垫、EPDM）等各种特殊行业用海绵深加工制品！
Our company mainly engaged in rubber trade, long-term supply and deputy national licensing EPDM rubber and other synthetic rubber.
我公司主要从事橡胶贸易，长期供应各国家正副牌三元乙丙胶及其它合成橡胶。
In the paper, it has expounded a combined way, adopting the main raw material of EPDM, in combination with many sorts of accelerators to research and manufacture compound formulation and mixing process suitable for micro-wave curing.
以三元乙丙胶做为主要原材料，采用多种促进剂并用的方法，研制适于微波硫化的胶料配方及混炼工艺，使制得的密封条产品具有外观质量好、耐臭氧、耐老化、使用寿命长等优点。
Can be used for any need to connect the local high viscosity, in particular, and ply tire, conveyor belt, etc.; especially for butyl rubber, EPDM rubber, SBR, butadiene rubber and other synthetic rubber.
可用于任何需要高粘度连接的地方，特别是轮胎侧和帘布层、输送带等；尤其适用于丁基胶、三元乙丙胶、丁苯胶、顺丁胶等合成胶。
The SEM and XPS results showed that the modification altered the chemical composition and aggregation state of the carbon black.
然后，研究了改性剂GMA、RRA和GMA/RRA混合物原位反应技术改性炭黑填充EPDM橡胶的加工性能。
This product is a series of synthetic rubber which uses EPMM as basal material, each item of guide line of the product reaches standard requirements of same type of product in American Ford Universal Company. It is mainly used in spot welding positions of all kinds of cars, doors, engine covers, car tops and trunks: it expands automatically through painting and fixing line to high temperature 170OC-205OC/20minute.
本产品是以EPDM为基料的合成橡胶系列，产品各项指标均达到美国福特通用公司同类型产品标准要求，主要用于各种汽车、车门、发动机盖、车顶及后备箱的点焊处：经涂装线进入高温170OC-205OC/20分钟后自动膨胀。