After computing flow's deflection ratio, the variety can be controlled by a compensation mechanism.
三、补偿模型在计算出业务流当前偏差率后，补偿模型就开始进行补偿协调了。
According to the force-deflection relationship and the amplification ratio derived from analytical method, a parametric study on mechanism performances was carried out.
基于长柔性杆设计了一种新的微位移放大机构结构形式，根据推导出的力-位移关系及放大比关系分析了机构主要性能与机构参数的关系。
Therefore, it is necessary to study the deflection mechanism of bridge piles, formulation mechanism of lateral pressure under different patterns and several damage patterns, which can provide theoretical basis for further study.
因此有必要对桥台桩的变形机制，不同模式下桩侧压力的产生机理及桩的几种破坏模式进行分析，从而为进一步研究提供理论依据。
This paper has investigated the mechanism of the stress and deflection that the piston withstands the gas pressure and temperature load. The result reveals that the thermal stress is prominent in the piston head, and the mechanical stress is prominent in the skirt of piston.
研究了活塞在燃气爆发压力和温度载荷共同作用下活塞的应力和变形机理，并进行了数值模拟，结果表明活塞在顶部以热应力为主，在裙部以机械应力为主。
To investigate the mechanism and parameter influence of the blade tip impact to fuselage for shipboard articulate helicopter, the moderate deflection beam model and the nonlinear quasi-steady aerodynamic model were adopted. Finite rotation was used to simulate the motions of hinges.
为了研究舰面铰接式旋翼桨叶桨尖与机体相碰的原因及参数影响，本文采用中等变形梁模型处理桨叶弹性变形，用有限转角模拟桨叶绕铰刚性运动和非线性准定常气动模型处理气动力。
According to the pre-brace construction condition of pipe-roof in tunnels constructed in soft or weak geology stratum, a mechanical model is presented to analyze the pre-brace mechanism of pipe-roof. And the deflection equation is carried out.
摘 要：文章根据软弱松散或不良地质地层中以及城市地铁中修建隧道时管棚超前预支护的施工情况，建立了可用来分析管棚作用机理的力学模型，并推导出管棚受力条件下的挠度方程。
According to features of thick wire electrode (diameter 1mm) (aging bending deformation, loss lengthen, torsion deflection and protuberant deformation), weights constant tension mechanism, roller institutions and block pin parts were designed.
针对粗电极丝（直径特性（时效弯曲变形、损耗加长、扭转变形和突起变形），设计了砝码恒张力机构、辊压机构及挡销部件。
The non-lateral sideslip equation is theory basis and criteria of properly designing steering trapezoid mechanism for the tractor whose steering is implemented by means of deflection guide wheel.
对于用偏转导向轮实现转向的拖拉机，理论无侧滑方程是合理设计转向梯形机构的理论基础和应遵循的准则。
The Camber in a High speed Corrugating Roll Mechanism and Its Dynamic Deflection Equation
高速瓦楞辊机构的中高度及其动挠度曲线方程
It is shown that the strengthening mechanism of the composites are secondly phase strengthening and grain refining, and the toughening mechanism is a synthetic effect in terms of grain refining, microcrack forming, crack deflection and crack branching.
ZrO2颗粒通过第二相强化和细化晶粒使复合材料强度得到提高，通过细化晶粒、裂纹偏转和分支、形成微裂纹等机制的综合作用增韧复合材料。
For the ZrB_2/SiC ceramic, strengthening mechanisms is grain refining and the toughening mechanism is crack deflection/decomposition and grain refining.
ZrB2/SiC的强化机制是晶粒的细化，韧化机制是裂纹的偏转/分解和晶粒的细化。
Analysis shows that the dislocations mechanism, nano-particles deposition, crack deflection, transgranular fracture, and curved cleavage strips are main reasons for increasing the fracture toughness of the ceramic materials.
分析发现：其内部位错机制、纳米颗粒的淀析、裂纹扩展路径偏转、沿晶断裂、韧窝及解理撕裂等是材料断裂韧性提高的主要原因。
The mechanism of influence of spring deflection on the cutting force is studied and the cutting forces model of ball end mill with considering spring deflection is established.
本文着重研究了刀具的弹性变形对切削力的影响机理，从分析刀具变形影响切屑厚度角度入手，研究了球头铣刀切削力的计算模型和方法。
The main toughening mechanism of ATS composite is interface debonding and crack deflection, based on the analysis of thermo-expansion mismatch and the SEM observation of microstrueture.
从热膨胀失配角度分析和SEM显微结构观察证实，ATS材料的主要增韧机理是界面解离和裂纹偏转。
The toughing mechanism was contributed to curve and deflection of crack.
第二相WC弥散分布细化了基本晶粒，韧化机制主要为裂纹弯曲偏转韧化。